色呦呦网址在线观看,久久久久久久久福利精品,国产欧美1区2区3区,国产日韩av一区二区在线

The Most Understandable Explanation for Cutting Insert Geometry Ever 2

The proper selection of cutting insert geometry is the up-most important factors during effective cutting. So pay attention, we are going to share you the most straightforward insight about cutting insert geometry, tool signatures based on a mold of the single-point cutting tool in this article, in order to help you comprehend their internal relations.

Main and auxiliary cutting edge

To remove metal chips from workpieces, the cutting edges need to cut along two surfaces. For this purpose, cutting tool is provided with two cutting edges, The main cutting edge, and an auxiliary cutting edge. The main cutting edge cuts the main portion of chips, while auxiliary cutting edge cuts the second surface and removes material.

The Most Understandable Explanation for Cutting Insert Geometry Ever 3

Take a look at the smooth corner on the main joint point of the main cutting edge and auxiliary cutting edge. This corner is known as the nose of tool.

Nose

The radius of nose greatly affects the surface finishing and strength of tool.

The Most Understandable Explanation for Cutting Insert Geometry Ever 4

Rake angle and relief angle

Material removal is easier when there is an angle between the cutting edge and surface, which is known as the rake angle of the tool, more specifically, as the back rake angle. It can be observed in the tool’s lateral side view.

The Most Understandable Explanation for Cutting Insert Geometry Ever 5

To avoid the rubbing between cutting tool and workpiece, a relief angle(clearance angle) is provided as shown.

The Most Understandable Explanation for Cutting Insert Geometry Ever 6

Increasing rake angle toward processed workpiece’s surface(positive direction) not only improves sharpness and strength of cutting edge but also decreases cutting power and cutting heat.

Relief angle is mainly designed for reducing wear between the tool and the part, simultaneously lower condition of cutting edge’s heat dissipation.

Side rake angle and side relief angle

Similar relief angle and rake angle are given in the auxiliary cutting edges. Its cross-sectional shape is shown here. There are side rake angle and side relief angle.

The Most Understandable Explanation for Cutting Insert Geometry Ever 7

End cutting edge angle and side cutting edge angle

Then look at the tool’s top view. You can witness the cutting edges form angles as shown. They are called end cutting edge angle and side cutting edge angle.

The Most Understandable Explanation for Cutting Insert Geometry Ever 8

The seven parameters together completely define the geometry of the cutting tool. We hope you have a conceptual overview of it. Thank you!

The Most Understandable Explanation for Cutting Insert Geometry Ever 9

發表評論

電子郵件地址不會被公開。 必填項已用*標注

翼城县| 丹巴县| 延寿县| 本溪市| 五河县| 牡丹江市| 海城市| 秦皇岛市| 赞皇县| 延吉市| 乌审旗| 江油市| 叶城县| 英吉沙县| 犍为县| 阳江市| 安宁市| 彭水| 华池县| 青阳县| 玉屏| 汉沽区| 乐东| 临沭县| 汕头市| 济阳县| 开远市| 达拉特旗| 句容市| 长春市| 扶绥县| 巨鹿县| 山阴县| 安远县| 彰武县| 获嘉县| 喀喇沁旗| 福安市| 邯郸县| 武隆县| 子洲县|